Eaton Network Management Card Uživatelský manuál stáhnout pdf (Strana 117)

www.eaton.com

Network

Management Card

(Network-MS)

User Manual

Network Management Card – User Manual 34003991XT_EN/EG Page 117/142

7 Configuration via RS232

 Use the cord supplied with the card (only with reference 34003918 or CAB-00010 or 720-C2270-00).

 Connect the card to a computer equipped with a hyperterminal type emulator. The serial link must be set

at 9600 baud, 8 bits, no parity, 1 stop bit, and without flow control.

 Check that UPS power is on.

 Enter admin as password (not modifiable).

 The menu is in English only.

-----------------------------------------------------------------------------

EATON

NETWORK MANAGEMENT CARD

-----------------------------------------------------------------------------

1 : Reset

2 : Network configuration

3 : Set Login Password to Default

4 : Return to Default Configuration

0 : Exit

-----------------------------------------------------------------------------

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 141 142

Žádné komentáře

Eaton Network Management Card Uživatelský manuál Strana 117