www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/EG Page 18/142
Ethernet Port
Card not connected to the network.
Card connected to the network but without
activity
Port is active in receiving / transmission
Port operating at 10Mbits/s.
Port operating at 100Mbits/s.
Settings/Sensor Port
Card startup in progress.
Communication with UPS in progress
Normal operation. Communication with the UPS
is operational
Configuration menu is active
Normal operation. Configuration menu is
deactivated
Communication with the Environment Sensor
(option).
2.3 Installation in the UPS
The Network Management Card (Network-MS) is "hot-swappable". It can be installed in all UPSs of the EATON
Pulsar series or EATON Powerware series equipped with a Minislot without having to shut it down.
On the UPS, remove the cover from the Minislot
Insert and tighten the card's retaining screws
Connect the ETHERNET cable
Wait 2min 30s. The card is completely operational when the green UPS Data LED flashes continuously.
Komentáře k této Příručce