Eaton Network Management Card Uživatelský manuál stáhnout pdf (Strana 53)

www.eaton.com

Network

Management Card

(Network-MS)

User Manual

Network Management Card – User Manual 34003991XT_EN/EG Page 53/142

 IPv6 Local Address: display the IP local address of the card, build from the MAC address. This field is

not editable. Always available when the IPV6 is enabled.

 IPv6 Address 2:

o If Auto Config is enabled: this field displays the second IPv6 address built from the IPv6 router

(not editable).

o If Auto Config is not enabled, this field is empty and not editable.

 Firmware Upload: Authorise (chose "Enabled") remote updating of the card's embedded software.

The default value for this parameter is "Enabled".

 Primary DNS Server: contains the IPv4 or IPv6 address of the main DNS server ensuring conversion of

the domain name to IP address.

 Secondary DNS Server: contains the IPv4 or IPv6 address of the secondary DNS server ensuring

conversion of the domain name to IP address if the primary DNS server is not available.

 SMTP Port: contains the port number of the SMTP server.

 SMTP Server: contains the name or IP address of the local server with which the card connects to send

e-mails.

It may be filled in either as host + domain name (DNS resolution), or directly with the IP address.

The default value is smtpserver. The card uses the standard port (25) for sending e-mails.

 SMTP Server Authentication: Displays login and password fields in order to connect the NMC card to

a SMTP Server that requires an authentication.

Important note:

The card must be rebooted after any changes to these IP parameters. See "System" page

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 141 142

Žádné komentáře

Eaton Network Management Card Uživatelský manuál Strana 53