Eaton Network Management Card Uživatelský manuál stáhnout pdf (Strana 14)

www.eaton.com

Network

Management Card

(Network-MS)

User Manual

Network Management Card – User Manual 34003991XT_EN/EG Page 14/142

IPP in connected mode

in/out

TCP

5000

IPP in UDP broadcast mode

in/out

UDP

4679, 4680R

RADIUS

out

UDP

1812*

LDAP

out

TCP

389*

* These ports can be changed by the user, the values shown are the defaults defined by the standards.

1.3.6 Environment sensor

 Temperature measurement from 0 to 70 °C with +/- 1 °C accuracy.

 Measurement of humidity from 0 to 100 % with +/- 6 % accuracy.

 Min / max time-stamped function for temperature and humidity.

 Choice of temperature readings in Celsius or Fahrenheit.

 High and low thresholds, hysteresis and offset adjustable via Web interface.

 Possibility of notification of status changes by e-mail, SMS or SNMP trap.

SMS notification requires the use of a third-party application that converts emails to SMS.

 Position detection of 2 dry contacts (maximum sensor/contact distance: 20 m).

 Name and status of each configurable contact.

 Recording of events and measurements in the card log

 Possibility of shutting down the installation in the event of a threshold being exceeded or on opening /

closure of a dry contact

 Connection to the card with straight shielded CAT5 RJ45 network cables (maximum card/sensor

distance: 10 m)

1.3.7 MIB (Management Information Base)

 The card is Compatible with following MIBs:

 MIB II (RFC 1213)

 Internet Engineering Task Force (IETF) Standard UPS MIB (RFC 1628)

 EATON Pulsar MIB (ex MGE) V1.7

 EATON Powerware MIB (PowerMib)



 See the appendix Chapter

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 141 142

Komentáře k této Příručce

Žádné komentáře

Eaton Network Management Card Uživatelský manuál Strana 14

Komentáře k této Příručce

Související produkty a manuály pro Sítě Eaton Network Management Card