Eaton Network Management Card Uživatelský manuál stáhnout pdf (Strana 84)

www.eaton.com

Network

Management Card

(Network-MS)

User Manual

Network Management Card – User Manual 34003991XT_EN/EG Page 84/142

6.2.2 System settings

These settings enable the customisation of the information on the UPS properties pages.

The parameter list is the following:

 UPS contact

 UPS location

 History log interval

 Environment log interval

 Default language

6.2.3 Trap receivers

This is the list of the supervision stations receiving traps. There is a maximum of 3 trap receivers.

The parameter list is the following:

 Receiver 1, 2 or 3 :

 Application name

 Host name

 Trap port

 Protocol

 Trap community

 MIB filter

6.2.4 Access control

These settings enable the configuration for secure access to the card via a web browser or SNMP. This menu can

also define Telnet/SSH/CLI procedure to access to the card.

The parameter list is the following:

 Login

 Password

 Security mode

 Telnet access

 Telnet security

 Console interface

6.2.5 Shutdown settings

These settings are used to define the behaviour of the UPS during a shutdown.

The parameter list is the following:

 Outlet 1 (main):

 Name

 Remaining time limit

 Remaining capacity limit

 Shutdown after

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 141 142

Žádné komentáře

Eaton Network Management Card Uživatelský manuál Strana 84